Taizhou Shuncheng Industry and Trade Co., Ltd

1. Daily preservation of the mold: a number of transferring components such as thimble,row position, information post, information sleeve oiling,cleansing of the mildew surface, transportation Drainage of water, which is maintained each and every day at some stage in mould production.

2. Regular maintenance: Regular upkeep consists of the cleansing of the exhaust slot in addition to every day maintenance, trapped fuel burns to the black stage plus exhaust, damage, correction of worn parts, etc.

3.Appearance maintenance: Paint the outdoor of the mildew base to keep away from rust. When the mildew is lowered, the constant mould shifting mildew must be covered with anti-rust oil. When the plastic spoon mould is stored, it ought to be closed tightly to forestall dirt from coming into the cavity.

The essential physique and the backside cowl are assembled in the structure of a double buckle. The backside shell of the product is double-clamped, and the top shell is inserted straight down, which is no longer easy

Dislocation the product meeting hole is uniform, the manner hole is 0.5MM, everyday plastic merchandise are most afraid of shrinking, the screw below the product

 

The most apparent way to reduce the yin in the studs and ribs is to limit the wall thickness round the screw column by using 0.8-1 MM. In fact

It is the pinnacle white. If the pinnacle white, the time-honored sprucing and stripping slope, the stripping slope of PP cloth merchandise must be at least half degrees.

On the top, the stripping slope of the ABS fabric product need to be at least 1.5 tiers or more, and the jack is designed round the product (good pressure Point).

 

If you are searching for plastic spoon mould, pls contact Shuncheng mould, we are Injection Molding Manufacturer. Shuncheng mould has various sorts of plastic spoon moulds for sale.